Product category: Adjustable fixed support Product Name: Adjustable Thoracolumbar Fixation Support Product Specification: One size fits all Performance characteristics: This product is injection molded from medical PE raw materials, used for correcting and stabilizing the trunk. It uses slight abdominal pressure to reduce the load on the spine, providing strong fixation support and stability for the spine. 1. Adopting medium hardness polymer synthetic materials; 2. The front and rear two piece structure provides reliable and stable support for the spine, with good adhesion 3. The ergonomically designed front and rear protectors provide stability and support for the lumbar spine, with a strong structure and good control. 4. Easy to wear, the lining can be removed and washed, and the side buttons can be adjusted freely to strengthen waist support and make it comfortable.

Product name: Adjustable walking shoes Product Specification: Large, Medium, and Small, High and Low Positions The Achilles tendon shoe body is made of PP plastic, with a rubber sole attached to the sole and a sponge sandwich fabric pad. 1. A replaceable sponge sandwich composite fabric pad wraps around the ankle and calf. 2. The height of the heel can be adjusted to fully load the forefoot. 3. Avoid frequent replacement of gypsum fixtures at different angles. 4. Strong fixed support, not easy to loosen or remove, easy to wear, lightweight, comfortable, open structure, and easy to adjust. Applicability （1） Ankle and foot stability fractures. （2） Severe ankle ligament sprain. （3） Used after surgery for ankle and foot fractures, reduction, or internal fixation. （4） Fixation after Achilles tendon repair surgery (adjustable to the forefoot weight-bearing position and used under non weight-bearing conditions of the heel). （5） Early removal of plaster is used to protect unhealed fractures or tissues. Instructions for use: 1. When wearing, first tie the foot and calf straps, and then press the inflation valve to inflate the calf bracket for comfort Fixed firmly shall prevail; When removing, first press the exhaust valve to exhaust the lower leg bracket, and then unfasten the fixing strap. 2. Follow the doctor's advice for the limitation or fixation angle of the ankle joint and the wearing period.

Product category: Adjustable fixed support Product Name: Adjustable Elbow Joint Fixation Support Product function: Fixing and supporting the elbow joint Product specifications: One size fits all, left and right Product Material: This product is made of composite fabric, nylon adhesive tape, adjustable elbow hinges, nylon fasteners, suspenders, etc. Nylon tape has high fixation strength and can be reused multiple times. The fasteners are made of engineering plastic and are not easily damaged. Performance characteristics: Classification of elbow protection angles: The fixation angles of the elbow protection are 90 ° and 120 °, and the elbow joint is adjusted for limited fixation between 0 ° and 120 °. Simple and convenient, easy to operate, saving operation time. Usage: 1. The upper end of the adjustable elbow joint support is fixed with a fixed strap at the upper arm, while the lower end is fixed at the forearm. 2. After fixing the upper arm and forearm straps, connect the adjustable elbow joint hinge to the upper arm and forearm straps. 3. Secure the buckle strap symmetrically through a plastic ring and two end fixing straps. 4. Adjust the dial scale to the appropriate angle.

Product function: mainly used for forearm reduction and fixation, external fixation of bone and wrist injuries, postoperative fixation, etc., can replace plaster, or First aid is fixed in emergency accidents. This product has the advantages of light weight, simple operation, flexible adjustment, and convenient use. Product Material: This product is made of materials such as plastic sheet, composite fabric lining, nylon fasteners, and rivets

Product name：Adjustable thoracolumbar spine fixation bracket Thoracolumbar orthosis after lumbar surgery Place of origin：Hebei China Size：Free Color：grey Material：PP, breathable liner Weight：1.6kg Package：One piece one OPP bag, 10 pieces in a carton. Size is 80*40*40 cm. Logo：Customized MOQ：10 pieces Performance characteristics: This product is injection molded from medical PE raw material, with adjustable circumference, used for correcting and stabilizing the torso, utilizing light Minimal abdominal pressure reduces the load on the spine, providing strong fixation support and stability. 1. Adopting medium hardness polymer synthetic materials; 2. The front and rear two piece structure provides reliable and stable support for the spine, with the advantages of good adaptability, adjustable circumference, and wide applicability. 3. The ergonomically designed front and rear protectors provide stability and support for the lumbar spine, with a strong structure and good control. Effectively limit the curvature, stretching, lateral curvature, and rotation of the thoracolumbar spine. 4. Easy to wear, with detachable and washable lining, and adjustable side buckles to enhance waist support and make it comfortable to wear

Material:Spandex & Nylon Product name:Knitted waist support Feature:Breathable, zero compression, no stitch Bone:Removable 6 + 6 pcs Support:Steel bone or Fiber bone Usage:Sports, daily Design:Grade compression Tenology:One-time knit; heating seal Package:Zipper bag, boxes OEM/ODM:Welcome Trade assurance:100%Supply Abilit

Ergonomic Rehabilitation Gloves Firm fist/stretch thoroughly Imitation human hand rehabilitation gloves, equipped with smart sensors, comfortable and sensitive real-time sensing. Pneumatic Exercise Does Not Hurt Hands Aerodynamics naturally drive the flexion and extension of the hand, reduce spasm, and protect the hand from secondary injury. Targeted Finger Training Freely Flex Any Finger Separate finger training for each finger by opening and closing the independent air valve switch Turn the air valve knob 90° to the horizontal, the air valve is closed, and the vertical is open. Single Finger Training Can individually control one hand to perform flexion and extension movements, and flexibly master the rehabilitation part. Two-Hand Mirror Training Promote Brain Function Remodeling Through the flexion and extension of the hand on the healthy side, the hand on the diseased side is continuously imitated and re-learned to induce the recovery of motor function. Small Body, Easy To Carry Intelligent Adjustment Of Flexion And Extension Time Full Touch Screen Simple Operation * 9-speed intensity adjustment settings * Portable charging, one charge takes about 3 days

Product name: Adjustable shoulder abduction fixed support Product specification: One size fits all (left and right) Applicable scope: it is applicable to the functional position fixation after Shoulder joint surgery, dislocation reduction, brain bone fracture with cotton nerve injury, and Shoulder joint fracture Product use: This product is called shoulder abduction fixator, also known as shoulder abduction bracket. It is a static fixed Shoulder joint fixator, which can fix the Shoulder joint joint in abduction, flexion, internal and external joint flexion, and wrist function positions. Product features: Beautiful design, light weight, stable function, easy to wear, safe and reliable. The flexion and abduction angle of Shoulder joint can be adjusted according to the needs of doctors. Keep the Shoulder joint at 70-90 degrees, and make the joint flexion at 40-90 degrees. Keep the wrist joint and thumb joint in a functional position and make them load free, and adjust the length of the upper limb slightly. Assembly requirements: 1. Under the guidance of a doctor, the length of the axillary support strip should be adjusted appropriately according to the patient's height, and then the chest strap, road mouth strap, and shoulder strap should be tightly tied to ensure good support and load relief. 2. Adjust the length of the upper arm support and forearm support of the fixator according to the patient's arm length, so that the timing joint and wrist joint are in the correct position, and then tie the upper arm and forearm fixation straps. 3. Determine the angle of shoulder abduction by adjusting the length of the axillary diagonal brace or the shoulder abduction and adduction adjustment disc; Determine the flexion angle by adjusting the joint adjustment disc.

Product Name Small: Adjustable Knee Joint Fixation Support Product specification: One size fits all Scope of application: It is applicable to the fixation and later rehabilitation training after joint parts (knee fracture, ligament injury, knee flexion contracture, acute soft tissue injury, patellar fracture, dislocation, lateral instability of knee joint, knee flexion). Performance characteristics gate: This product can freely adjust and fix the limit between the dial scales to meet the needs. It can provide support, fixation, functional exercise, load, and other functions. Adjusting the angle only takes a few seconds, which is simple, convenient, and easy to operate, greatly saving operation time and improving work efficiency. Usage: 1. The fixed strap at the upper end of the adjustable knee joint bracket is fixed at the thigh above the knee joint. Fix the fixing strap at the lower end of the knee joint bracket at the lower leg 2. After fixing the thigh and calf straps, connect the lower chain to the thigh and calf straps for fixation. 3. Secure the buckle strap symmetrically through a plastic ring and two end fixing straps. 4. Adjust the dial scale to the appropriate angle. Contraindication: 1. Obvious lumps on the skin; 2. Has a tendency to bleed (thrombocytopenia, leukemia) 3. Skin eventually ruptures and ulcerates.

Product Name: Functional Position Hand Rest/Functional Position Forearm Support Product specifications: large and small (left/right) Product features: This product is made of composite fabric material and medical shaping plate, according to the style and curvature of the forearm and palm. Easy and convenient to operate, with a snug fit. It can replace gypsum fixation, with good strength and breathability. Product Introduction: 1. Sponge sandwich self-adhesive fabric with comfortable and breathable balance inside and outside. 2. Formed aluminum strips are hidden inside, outside, and behind to secure the wrist. 3. Convenient adjustment of tightness with rubber buckles and Velcro straps

Horizontal arch support function: increases the force bearing surface of the foot and reduces excessive stress. Hinge motion design: effectively stabilizes and supports the free movement of the thumb joint. Correction of State of nature: attach to the foot, protect the foot joints, keep the thumb in its original natural position, perfect shape and prevent foot diseases.

Material: 95%non-woven fabric,5% spandex,natural rubber latex. Usage: Medical wrap, fixed dressings. Products Features: Bandages are individually poly bagged,cleanand refrain from dust. Self adhesive tape only sticks to itself not toskin, cloths and hair. No pins or clips requiredThe bandage is easy to cut or tear by hand, thinyet strong, soft, self sticking,support,high com-fortable,breathable,lightweight.