• head_banner_01

EVA prosthetic leg liner, thermoformed sleeve sleeve, prosthetic leg liner

EVA prosthetic leg liner, thermoformed sleeve sleeve, prosthetic leg liner

1 4 5 7 8 9 10 11

1. Take a mold based on the patient’s residual limb.
2. Select a suitable prosthetic inner liner and place it in an oven, heating at 220 ℃ for 1 minute.
3. Select a suitable PVA mold sleeve and wet it with water before placing it on the mold.
4. Take out the heated inner sleeve of the prosthetic limb, place it on the mold, and heat it according to the shape of the mold
Forming. Allow to cool.
5. Trim the formed inner liner according to the prosthetic socket made to meet the patient’s requirements


Post time: Sep-04-2023